Site Search Results

What is Smoke Tablet? Smoke tablet offered as a solution for ventilation installation, chimney, sealing, odor test and smoke evacuation equipment testing that require artificial smoke in the environment. It has a structure that will provide the necessary intense smoke quickly. . With the intense smoke obtained, impermeability and device performance tests can be performed easily. . Smoke Tablet / Cartridge / Generator: It defines the test apparatus produced for chimney draft test, which emits smoke without creating flame and soot when burned. Smoke Tablets 45 second smoke tablet (Available in Stocks) 10 cartridges / box Smoke Color: white weight approx: 3 g / cartridge Size approx: 32 x Ø 14 mm Smoke Volume approx: 2,5 m³ Burning time approx: 45 sec. Compliant to BS 5440-1, Ds 675, Test Method ISO 5659-2. Use for testing: Smoke Alarms, Air Filters, Hoods, Air Balancing, Fans, Photography, Special Effects and much more. Not used in sensitive environments, contains large amounts of chloride 90 second smoke tablet (Special order) Allows to produce smoke in use 150 second smoke tablet (Special order) Allows to produce smoke in use 240 second smoke tablet (Special order) Allows to produce smoke in use 300 second smoke tablet (Special order) Allows to produce smoke in use Smoke Cartridges features Cartridges made of environmentally friendly plastic. Moisture-sealed smoke pellets. Reinforced base for minimal heat transfer. There are only smoke pellets made of high-content chemicals. It is guaranteed for 3 years from the date of delivery. Contains no zinc, rubber powder or mothballs. More than 250 security tests have been carried out. There is a warranty mark on the bottom. Comes in a consumer pack or large pack. Fume Tablet Usage Areas Energy Saving insulation test Ventilation Channel Test Draft Test Leak detection Security tests Negative Pressure Chambers Positive Pressure Rooms Fume Hoods Exhaust fans Stage and Screen Effects Photo Effects Air Balancing test Filtration Test Dust Removal Systems Fire and Smoke Alarm Test Poultry and Livestock Education Heat Exchangers Tanks and Piping Kitchen Hoods Electronic Air Filters Asbestos Reduction Radon Reduction Mechanical system risk management. Waste Treatment Systems

Smoke Test Tablet Smoke tablet offered as a solution for ventilation installation, chimney, sealing, odor test and smoke evacuation equipment testing that require artificial smoke in the environment. It has a structure that will provide the necessary intense smoke quickly. . With the intense smoke obtained, impermeability and device performance tests can be performed easily. . Smoke Tablet / Cartridge / Generator: It defines the test apparatus produced for chimney draft test, which emits smoke without creating flame and soot when burned. Smoke Tablets 45 second smoke tablet (Available in Stocks) 10 cartridges / box Smoke Color: white weight approx: 3 g / cartridge Size approx: 32 x Ø 14 mm Smoke Volume approx: 2,5 m³ Burning time approx: 45 sec. Compliant to BS 5440-1, Ds 675, Test Method ISO 5659-2. Use for testing: Smoke Alarms, Air Filters, Hoods, Air Balancing, Fans, Photography, Special Effects and much more. Not used in sensitive environments, contains large amounts of chloride 90 second smoke tablet (Special order) Allows to produce smoke in use 150 second smoke tablet (Special order) Allows to produce smoke in use 240 second smoke tablet (Special order) Allows to produce smoke in use 300 second smoke tablet (Special order) Allows to produce smoke in use Smoke Cartridges features Cartridges made of environmentally friendly plastic. Moisture-sealed smoke pellets. Reinforced base for minimal heat transfer. There are only smoke pellets made of high-content chemicals. It is guaranteed for 3 years from the date of delivery. Contains no zinc, rubber powder or mothballs. More than 250 security tests have been carried out. There is a warranty mark on the bottom. Comes in a consumer pack or large pack. Fume Tablet Usage Areas Energy Saving insulation test Ventilation Channel Test Draft Test Leak detection Security tests Negative Pressure Chambers Positive Pressure Rooms Fume Hoods Exhaust fans Stage and Screen Effects Photo Effects Air Balancing test Filtration Test Dust Removal Systems Fire and Smoke Alarm Test Poultry and Livestock Education Heat Exchangers Tanks and Piping Kitchen Hoods Electronic Air Filters Asbestos Reduction Radon Reduction Mechanical system risk management. Waste Treatment Systems

Smoke Test Tablet Smoke tablet offered as a solution for ventilation installation, chimney, sealing, odor test and smoke evacuation equipment testing that require artificial smoke in the environment. It has a structure that will provide the necessary intense smoke quickly. . With the intense smoke obtained, impermeability and device performance tests can be performed easily. . Smoke Tablet / Cartridge / Generator: It defines the test apparatus produced for chimney draft test, which emits smoke without creating flame and soot when burned. Smoke Tablets 45 second smoke tablet (Available in Stocks) 10 cartridges / box Smoke Color: white weight approx: 3 g / cartridge Size approx: 32 x Ø 14 mm Smoke Volume approx: 2,5 m³ Burning time approx: 45 sec. Compliant to BS 5440-1, Ds 675, Test Method ISO 5659-2. Use for testing: Smoke Alarms, Air Filters, Hoods, Air Balancing, Fans, Photography, Special Effects and much more. Not used in sensitive environments, contains large amounts of chloride 90 second smoke tablet (Special order) Allows to produce smoke in use 150 second smoke tablet (Special order) Allows to produce smoke in use 240 second smoke tablet (Special order) Allows to produce smoke in use 300 second smoke tablet (Special order) Allows to produce smoke in use Smoke Cartridges features Cartridges made of environmentally friendly plastic. Moisture-sealed smoke pellets. Reinforced base for minimal heat transfer. There are only smoke pellets made of high-content chemicals. It is guaranteed for 3 years from the date of delivery. Contains no zinc, rubber powder or mothballs. More than 250 security tests have been carried out. There is a warranty mark on the bottom. Comes in a consumer pack or large pack. Fume Tablet Usage Areas Energy Saving insulation test Ventilation Channel Test Draft Test Leak detection Security tests Negative Pressure Chambers Positive Pressure Rooms Fume Hoods Exhaust fans Stage and Screen Effects Photo Effects Air Balancing test Filtration Test Dust Removal Systems Fire and Smoke Alarm Test Poultry and Livestock Education Heat Exchangers Tanks and Piping Kitchen Hoods Electronic Air Filters Asbestos Reduction Radon Reduction Mechanical system risk management. Waste Treatment Systems

Laser Fire Detection Beam Detectors Optical Beam Smoke Detector is used to provide "wide area" smoke detection. These are generally practical. Traditional point type detector is used in environments where installation and operation is difficult. (installation, wiring and maintenance) It also provides wide coverage at low cost. Optical Beam Smoke Detectors are ideal for high ceilings, dusty and dirty environments, or you may encounter extremely hot environments. Typical applications: - Conference and Exhibition Centers - Shopping malls - Historical buildings - Mosques - Museums - High Ceiling areas - Production Facilities - Warehouses - Airports - Hotels and Casinos - Sports and Entertainment Centers Beam Smoke Detector Types: Optical Beam Smoke Detector works on the principle of darkening of light. Optical Beam Smoke Detector photosensitive element sees light produced by the Transmitter in normal condition. The receiver is calibrated to a preset sensitivity level based on the percentage of total blackening. There are two general types of Beam Optical Smoke Detector - Projected and Reflective. The type used will be dictated by the installation and environmental conditions and restrictions. Projected Beam Smoke Detectors: The transmitter (TX) and receiver (RX) area must be protected up to 100 meters separately installed at each end. The Receiver Control Unit is electrically connected to a second entity installed at ground level. Projected Optical Beam Smoke Detectors are less sensitive to leak reflection as the reflections go back to the Transmitter. As a result, the Projected Optical Smoke Detector Beam can operate within narrow gaps left in the operating environment. In addition, Projected Optical Smoke Detector Beam Emitter and Receiver units are often considered into compact and easy "aesthetic" architectural designs. Reflective Beam Smoke Detectors: Transmitter (TX) and Receiver (RX) are contained in one unit. Up to 100Metres away from the transmitted infrared ray reflected by the back reflector (prism), it is mounted across the unit. The receiver is connected to a control unit that can be either integrated with the Transceiver or mounted at ground level. Reflected Optical Beam Smoke Detectors use less wiring (power and wiring required only at the end of the Radio) and only require the Transceiver to be aligned. However the Reflected Optical Beam Smoke Detector Beam can be vulnerable to reflective items near the IR beam path. Because the reflector has a wide acceptance angle, it does not need to be correctly aligned at both ends of the projected Optical Smoke Detector Beam. About Fireray FFE Beam Detector Everday EV6100 Beam Dedektör Hakkında GST 9105-E Işın Tipi Beam Dedektörü Hakkında About Vesda Osid Beam Detector TNA TX7130 Tanda Beam Dedektör Hakkında

Wireless Access Control and Electric Lock Striker You want to apply access control to your existing various doors. In the table that appears, the route of carrying the cables up to the door and the need to make modifications in return for the door lock or door has emerged and you had to review or cancel the decision of the access control application for your business due to this table! The solution is aperio, produced for wireless access control application, where reader and lock are together. With the change of the door handle and lock mechanism, it will be an integrated access control application with your existing system and cards. Suitable for application in various door types in a wide range of products. Aperio is internationally certified, with its high security and long battery life. The wireless nature of the system allows the addition of new controlled doors by lowering the installation costs. Easily integrates into existing systems Electronic cylinder application puts an end to the problem of carrying keys. Can be assembled in less than 2 minutes Reduces installation costs by 60% Can be used for 3 years without changing the battery

Under Cushion Emergency Warning Alarm Device Especially deaf and hard of hearing disabled individuals who are in sleep cannot hear the siren sounds in emergency situations such as fire and disasters that require evacuation. Platinum Technology; We offer solutions with cushion vibration devices integrated into the central fire detection system to warn individuals with hearing difficulties in emergency situations. As an example, when we consider a hotel project: Conventional siren lines of a fire detection system in accordance with standards will be 24 Vdc and the line will be energized at the time of alarm .. Special sockets to be placed on the bed heads from the central siren line during the first construction of the building and these sockets are connected to the pillow under the pillow. Vibration devices and sirens will be warned when they are active. It is not affected by power interruptions because it receives voltage from the central system. You can use it in all bedrooms with suitable socket infrastructure. It is compatible with conventional siren lines of all fire detection systems regardless of brand. Provides an effective warning. It is CE approved and tested to all current British and European standards such as EN 61000-6-1: 2001. FOR OUR OTHER ELECTRONIC ACCESSIBILITY SOLUTIONS

Cigarette, Tobacco Smoke Detector We offer effective detection with cigarette smoke detector solutions to integrate with building automation, alarm, etc. systems. We offer solutions and alarm detector solutions that detect the smoke of all products that contain tobacco, which are prohibited and harmful to health and pose a risk to use in businesses. The answer to the frequently asked question, "Does the smoke detector make a cigarette?" Although the smoke detector is sensitive to the smoke that creates the fire due to its sensor structure, it will not be able to detect without the formation of the so-called under-smoke environment for tobacco smoke detection. The solution for fast and early cigarette smoke detection is "Anti Tobacco" tobacco smoke detection and alarm detectors. You can minimize your risks with our cigarette smoke detection solutions that help control workforce losses, health and fire risks caused by non-compliance with tobacco use ban in businesses. "Cigarette smoke detection detectors: They are especially sensitive to tobacco and cigarette smoke. Selectable sensitivity level on some models. They are manufactured to meet the needs of different institutions and organizations. Prevention of smoking in prohibited areas beyond your control and detection of cigarette smoke in all areas from theaters to movie theaters, hotels to fairgrounds, from factories to industrial facilities, from textile workshops to chemical areas. It is used to minimize, deter and detect the risks that may occur as a result of uncontrolled smoking, thanks to the audible stimulation of cigarette smoke after detection. Product General Features Easy installation and maintenance Photoelectric detection technology Test function • High sensitivity to tobacco smoke Warning sounds • Can be linked together Optional remote indicator or relay output Guaranteed and high quality products and stable operation Usage areas • Factories • Flammable Flammable material facilities Hotel, hostel and student dormitories WC and changing cabins Textile industry manufacturing and storage areas Advantages • Early and effective cigarette tobacco smoke detection Integration with existing brand-independent alarm systems • Wired and wireless detector options With the two different solutions offered, it can monitor all risks with a central system. You can deter them with wireless solutions. 1. Central system solutions 2. Wireless (Battery powered) solutions Our products are designed to detect tobacco smoke in accordance with its particle structure. It is only possible to detect the smoke that occurs during the use of cigarettes, etc. with cigarette - tobacco detectors manufactured for these purposes. With all other fire and smoke detectors, very dense smoke is required to detect cigarette smoke. You can reach PLATIN TECHNOLOGY experts for special solutions for your business. ''All Detectors are similar in shape to each other. The detector structure of the Cigarette Detector is distinguished from the others by its sensor structure . The detector is designed to detect tobacco particles. '' You can minimize your risks with our cigarette smoke detection solutions that control the workforce losses, health and fire risks caused by non-compliance with the tobacco use ban in businesses. "Cigarette smoke detection detectors: Especially sensitive to tobacco and cigarette smoke. ​ Selectable sensitivity level on some models. They are manufactured to meet the needs of different institutions and organizations. From theaters to movie theaters, from hotels to fairgrounds, from factories to industrial facilities, from textile workshops to chemical areas, preventing smoking and detecting cigarette smoke in prohibited areas beyond your control by your staff and visitors. It is used to minimize, deter and detect the risks that will occur as a result of uncontrolled smoking, thanks to the audible warning after the detection of cigarette smoke. ​ Cigarette Smoke Detector Features • Easy installation and maintenance • Photoelectric sensing technology • Test function • High Tobacco smoke sensitivity • Warning sounds • Interconnectable • Optional remote indicator or relay output • Guaranteed and high quality products and stable operation ​ Cigarette Smoke Detector Usage Areas • Factories • Flammable Flammable Substance Facilities • Hotels, Pensions and student dormitories • WC and changing cabins • Textile industry manufacturing and storage areas Cigarette & Tobacco Smoke Detector Advantages • Early and effective cigarette tobacco smoke detection • Integration with existing brand-independent alarm systems • Wired and wireless detector options ​ With three different solutions offered, it can monitor all risks with a central system. You can make quick and easy installation with wireless solutions. ​ 1. Conventional cigarette smoke detector with control panel 2. Battery powered cigarette smoke detector 3. Relay type cigarette smoke detector ​ Our products are designed to detect tobacco smoke in accordance with its particle structure . It is only possible to detect the smoke that arises from the use of cigarettes, etc., with cigarette-tobacco detectors manufactured for these purposes. With all other fire and smoke detectors, very dense smoke is required to detect cigarette smoke. You can reach PLATIN TECHNOLOGY experts for special solutions for your business. You can reach all our cigarette smoke detection and alarm solutions here.

Automotive Key Management Solutions Supra indigo ® KeyBox key storage boxes: For the safe storage of keys that cause problems in all businesses such as logistics, maintenance, repair, second hand, service, sales, etc.in the automotive sector, to access them quickly when necessary and to prevent workforce losses that will occur as a result of momentary key losses. offers a solution. Key storage boxes are made of special aviation aluminum alloy and are durable in construction. In this way, it can be kept in the box on the vehicle, regardless of seasonal conditions and day or night. Fast secure key management can be provided with the encrypted key system specially created for the enterprise. In vehicles with new generation keyless operation feature, it is necessary to disable the feature in such vehicles because the key must be kept away from a certain distance in order to lock it, or to use new generation models produced for such keys. The solution for such vehicle keys is the max series. A special area inside the storage box ensures that the key is magnetically protected and prevents the doors from being opened even in the storage box hung on the vehicle glass. Automotive key storage boxes are ultra lightweight and have suitable storage capacity for automobile keys. Storage solutions for automobile keys Oversized vehicle key box Car Keybox

Jam Aqua Alarm CDBi-485 Zone Detector Module Field detector module for connection to the detection cable. It is made of stainless and ABS plastic. LED on the module and internal alarm sound to give local alarm indication. For connection to the I-Zone Mini control panel. FEATURES 'Aqualarm' CDBi-485 Zone Detector Module, one purpose ABS Box, housing of the electronic circuit. A locking line socket at one end of the module It is installed to allow the connection of the detection cable. The other end is equipped with cloths For connection to the PCB. There is a red LED at the top of the module. The The red LED will flash to indicate an alarm condition. Alarm status and monitoring Single RS485 connection to the I-Zone Mini control panel. The module comes complete with a End-to-End Resistor Plug; Detection cable. Normal operating voltage: 12 volt dc Quiescent Current: <10mA. Per detector. Alarm Current: <100mA. Per detector. Detector Oscillator frequency: 6kHz Recommended connecting cable: 4 Core Cable 22AWG Screened Twisted Pair Belden Ref 8723 Line voltage drop: 1.5 mV / m. Approvals: BS EN ISO 9001: 1994 EMC Directive 89/336 / EEC CD-X Detect Cable Cable detection for all models of the control panel. Constructed of hard-worn Helegaine 66 nylon extinguishing arms providing greater protection against dust and conductive contamination. Locking plugs and sockets for a secure connection. Available in modular lengths of 1, 2, 5 and 10 meters. For connection to Detector Modules and Placement equipment. FEATURE 'Aqualarm' water leak Detection Cable, two flat tinned copper The braids are separated and protected with Helegaine self-extinguishing nylon 66 sheath. This type of configuration protects the sensing centers against dust, others Conductive contamination types and mechanical damage. Cable available In modular lengths of 1, 2, 5 and 10 / m. Each cable is pre-terminated with a male And female locking line plug and socket. Installation Method When a liquid leaking from the piping needs to be protected, the Detection Cable It should be fixed with cable ties under the pipeline, then steam Gasket or thermal protection installed or fixed in the floorboard Just below the pipeline, using appropriate clips or ties. Where protection is required from a liquid leaking from equipment, e.g. water-cooled Computers, chiller factory, air conditioning units etc. Detection Cable for It is fixed on the floor around the equipment. Cable Voltage: No greater than 2 volts from DC Cable diameter: 8 mm Maximum Detection Cable length: Reconstruction System: 50 / m (including bridge cable). ZLM-500: 500 / m (including leader / jumper cable) Operating temperature range: +1 degrees C to +85 degrees Construction: Self extinguishing polymer 66 Monofilaments according to ISO 3795 Braid with straight canned copper sensing veins. Color: Gray / blue Approvals: BS EN ISO 9001: 1994, EMC Directive 89/336 / EEC CE

Jam Aqua Alarm CDBi-485 Zone Detector Module Field detector module for connection to the detection cable. It is made of stainless and ABS plastic. LED on the module and internal alarm sound to give local alarm indication. For connection to the I-Zone Mini control panel. FEATURES 'Aqualarm' CDBi-485 Zone Detector Module, one purpose ABS Box, housing of the electronic circuit. A locking line socket at one end of the module It is installed to allow the connection of the detection cable. The other end is equipped with cloths For connection to the PCB. There is a red LED at the top of the module. The The red LED will flash to indicate an alarm condition. Alarm status and monitoring Single RS485 connection to the I-Zone Mini control panel. The module comes complete with a End-to-End Resistor Plug; Detection cable. Normal operating voltage: 12 volt dc Quiescent Current: <10mA. Per detector. Alarm Current: <100mA. Per detector. Detector Oscillator frequency: 6kHz Recommended connecting cable: 4 Core Cable 22AWG Screened Twisted Pair Belden Ref 8723 Line voltage drop: 1.5 mV / m. Approvals: BS EN ISO 9001: 1994 EMC Directive 89/336 / EEC CD-X Detect Cable Cable detection for all models of the control panel. Constructed of hard-worn Helegaine 66 nylon extinguishing arms providing greater protection against dust and conductive contamination. Locking plugs and sockets for a secure connection. Available in modular lengths of 1, 2, 5 and 10 meters. For connection to Detector Modules and Placement equipment. FEATURE 'Aqualarm' water leak Detection Cable, two flat tinned copper The braids are separated and protected with Helegaine self-extinguishing nylon 66 sheath. This type of configuration protects the sensing centers against dust, others Conductive contamination types and mechanical damage. Cable available In modular lengths of 1, 2, 5 and 10 / m. Each cable is pre-terminated with a male And female locking line plug and socket. Installation Method When a liquid leaking from the piping needs to be protected, the Detection Cable It should be fixed with cable ties under the pipeline, then steam Gasket or thermal protection installed or fixed in the floorboard Just below the pipeline, using appropriate clips or ties. Where protection is required from a liquid leaking from equipment, e.g. water-cooled Computers, chiller factory, air conditioning units etc. Detection Cable for It is fixed on the floor around the equipment. Cable Voltage: No greater than 2 volts from DC Cable diameter: 8 mm Maximum Detection Cable length: Reconstruction System: 50 / m (including bridge cable). ZLM-500: 500 / m (including leader / jumper cable) Operating temperature range: +1 degrees C to +85 degrees Construction: Self extinguishing polymer 66 Monofilaments according to ISO 3795 Braid with straight canned copper sensing veins. Color: Gray / blue Approvals: BS EN ISO 9001: 1994, EMC Directive 89/336 / EEC CE

HID ® Omnikey ® 5422 Card Reader Dual interface contact and contactless Hid Omnikey smart card reader Hid Omnikey The 5422 represents the ultimate combination of contact and contactless technology in a single device. The solution features a PC-connected reader that reads/writes both a 13.56 MHz contactless smart card and virtually any contact smart card to support environments where both contact and contactless smart card technologies are required. The reader provides users with convenience, speed and security for applications such as user authentication to computers, software, cloud-based applications, networks and websites. The OK5422 eliminates the need to install drivers and is suitable for use with standard PC or workstations as well as thin and zero clients. ​ Benefits: Versatile - Ideal for end-user environments using both contact and contactless smart card technology and migration scenarios Leverages existing employee badge - Extends use of existing physical access cards to PC login as well as network and cloud applications. Easy to install - Eliminates the need to install drivers; uses native CCID drivers supported within the operating system. Increased security and improved user experience - Read and retrieve high security one time passwords (OTP) from Seos® card.

Securiton Early Fire Detection Specialist Securiton AG belongs to the Swiss Securitas Group and has been in full technical security service since its establishment in 1948. With its pioneering spirit and far-sighted approach, it was developed as an approved specialist for high standards of safety. Years of partnership-based collaboration with clients, consultants, government agencies and authorities is proof of our extensive knowledge and confidence in quality. Today, Securiton designs, installs and maintains systems for the security industry and defense technology both in Switzerland and worldwide. As a competent consultant and a recognized plumber, Securiton offers a wide range of security systems for fire detection, burglary / hold alarm systems, personal protection, access control, video surveillance, property and environmental protection. You can get support from Platin Technology experts in Turkey-wide projects. SecuriRAS ASD suction smoke detectors: the complete range for any application Securiton's smoke absorbing smoke detectors are among the most sensitive and reliable early warning systems to fires. Securiton offers a full range of models that make the lightning-fast detection of fires both scalable and cost-effective for any monitoring area.SecuriRAS ASD 531 - simple and convenient for small facilities ASD 531 for fast commissioning and professional use of smaller areas and facilities. It is available to everyone without the need for monitoring and training. The detector is configured directly on the device without the need for a computer and the operation is uncomplicated. As with the two large models, it is equipped with a tried and tested HD detector with LVSC (large volume smoke chamber). This results in exceptional sensitivity combined with an impressive long service life.SecuriRAS ASD suction smoke detectors: the complete range of models for any application Securiton's smoke absorbing smoke detectors are among the most sensitive and reliable early warning systems to fires. Securiton offers a full range of models that make the lightning-fast detection of fires both scalable and cost-effective for any monitoring area.SecuriRAS ASD 531 - simple and convenient for small facilities ASD 531 for fast commissioning and professional use of smaller areas and facilities. It is available to everyone without the need for monitoring and training. The detector is configured directly on the device without the need for a computer and the operation is uncomplicated. As with the two large models, it is equipped with a tried and tested HD detector with LVSC (large volume smoke chamber). This results in exceptional sensitivity combined with an impressive long service life.SecuriSens ADW 535 line type heat detector: Detecting fires in extreme conditions Fires are more common in hazardous areas - conventional fire detectors quickly reach their limits. Securiton's smart line heat detector works perfectly even under the harshest conditions. Fully automatic monitoring of large areas, resistance to corrosive gases, excessive humidity and high temperatures, or distinguishing between false alarms and real dangers - state-of-the-art line The list of requirements for a type heat detector is both long and exhaustive. SecuriSens ADW 535 heat detector - uncompromising operation Fire detection should be possible in all ambient conditions - not only in good weather and room temperatures. Whether in the gas and oil industry, chemical production facilities or vehicle storage halls, loading platforms and road tunnels, the ADW 535 comes into its own where other systems fail.

Power Plants Special Solutions Solar, Wind and Hydroelectric power plants have serious initial investment costs. Our priority measures will be to protect the investment and minimize its risks. In addition, considering their contribution to meeting the electricity needs of our country as a business; Prolonged power outages cause serious problems. It can cause big problems that cannot be measured with money. Long-term power outages for electrical power-dependent hospitals and other emergency services can be costly of living. Platinum technology offers security solutions with thermal imaging cameras at critical points of the electricity network as well as in GES and RES power plants. To prevent damage from possible terrorist attacks as well as ordinary crimes such as theft, it is extremely important to ensure continuity of power distribution through the security of solar power plants and switchyards. There are other threats to this risk. Problems caused by equipment that has completed its useful life or malfunction can be very dangerous. Therefore, online thermal monitoring solar panels switchyards can be monitored in the security system. By constantly monitoring several switch parts of the electrical substation, we ensure that faults are detected as they evolve. In this case, the power company can redirect power through other parts of the infrastructure to avoid immediate downtime. This saves repair crews some time to order parts and schedule repairs. The combined alarm system that resolves environmental security and operational risks with a thermal camera provides a high return on investment. "By combining both security and condition monitoring systems in a single system, this system has a high added value. The number of failures of the institution is reduced by an average of 20% and thus, serious savings are achieved. With the thermal camera, it is possible to monitor the temperatures of energy transmission lines and critical parts in the substation. An alarm is activated if any point in the camera's field of view reaches a temperature higher than the preset threshold temperature. FIRE DETECTION AND WARNING SYSTEM: Controlling the fire risk with the fire detection system to be installed in all closed areas within the facility.It provides instant detection of the first formation of the fire in the form of particles and allows the fire to be intervened before it grows. For this purpose, the fire alarm systems installed by Platin Teknoloji prevent the life-threatening of the personnel in the environment and material damage to the building. The system includes a fire control panel. It evaluates the warnings coming from various type detection elements suitable for the needs of your business and activates the sirens, flashers, telephone dialer. It delivers detailed information to the relevant manager and security personnel. While all these events are taking place, it is ensured that the alarm scenarios previously prepared are activated by sending information to other systems from the moment the fire is detected. CLOSED CIRCUIT CAMERA SYSTEMS: GES - HEPP - RES camera systems, which are used to minimize private security and operational risks in accordance with the specific needs of the energy sector, produce indispensable solutions for operational safety. We offer i camera solutions and DVR recording device and command control center solutions suitable for all kinds of business and manufacturing conditions. Our products do not only register. It produces alarm scenario solutions in order to prevent the occurrence of events, problems and risks by performing event analysis. All systems record in the structure and quality determined by the institution and provide access to images of appropriate quality when necessary. ELECTRIC PANELS AUTOMATIC FIRE EXTINGUISHING: In the GES - HES - RES energy sector, cabin-type extinguishing systems that provide low initial investment and operating costs and high performance are used for electrical panels and cabins where risks are concentrated. It provides effective extinguishing with FM 200 and equivalent HFC227ea and HFC125 etc. extinguishing gases used in fire extinguishers. They are odorless, colorless, non-residual gases that do not harm electrical devices. WATER MOISTURE DETECTION AND ALARM SYSTEMS: In the GES - HES - RES energy sector, especially to prevent damage to the facility as a result of leakage and humidity that will occur out of control from electrical fields, to detect possible raids, to warn the relevant parties and to activate the water discharge engine, heating system, ventilation system according to the scenario are solutions. CABLE TRAYS, VENTILATION SYSTEMS FIRE DETECTION AND DETECTION SYSTEMS: With a special sensor cable to be installed in high risk and difficult to detect areas such as electrical installations and ventilation ducts, sudden temperature changes are detected at the points where it is located and fire is detected before it occurs. Linear Heat Detection is a versatile and economical fire detection product. Considering the initial investment, maintenance, operating costs and operating performance, .Extrem offers economical and performance solutions for fire detection needs. Our experts provide solutions to minimize risks specific to the GES - HES - RES energy sector. Please contact us for special solutions for your projects in Turkey and all countries in our service area.

Artificial Water Sound Water Saving Solution in Public Toilets According to the researches, all individuals, both men and women, try to suppress the unwanted sounds from outside and relieve their anxiety by making flushing noise / water sound in public toilets open to public use, thus they try to prevent their faces from reddening when they go outside the WC. The habits of suppressing the sounds in the toilet with the sound created by flushing the faucet, leaving the faucet open or wasting meters of toilet paper cause at least 20 m3 of water and meters of toilet paper. The solution to prevent waste and preventing the sounds inside the WC from being heard from the outside is an artificial siphon, a water sound device. This device is completely domestic production. It can be activated when the car starts to use, when the door is locked or with a manual button. Environmental solutions at Platin Technology

Disabled Toilet Rope Emergency Call Device The emergency call apparatus in accessible toilets created for barrier-free living is specially designed and manufactured for the project and can be operated by pulling a rope, so that it can be reached from the toilet bowl or when falling on the ground. The emergency call apparatus consists of 2 parts. ​ 1. rope button: hanging from the ceiling on both sides of the toilet, with an average height of 75 cm from the floor and a gap of 60-70 cm between them. ​ 2. Emergency call rope: It is positioned on all walls of the toilet at a height of 30 cm to 50 cm from the floor. The roped emergency call button and apparatus to be built on the walls of the toilet are intended to enable people who fall down while using the toilet due to illness or other reasons to reach them from any side of the toilet. ​ Who Should Respond to a Rope Call Button Alarm? In case of a possible panic, the alarm will be activated by using the rope call. While environmental assistance can be provided with an active warning on the door, in businesses with 24/7 security service, it must be conveyed to the security guards with an audible and visual warning. The security guards will quickly coordinate the emergency response with the medical team. ​ How Should Rope Calls Be Used in Areas Where There Are No Health & Safety Officers? It can be used in public areas to provide a warning with sound and light that can be heard outside the wet area and with a warning text indicating the nature of the alarm. ​ How Should the Rope Call Panic Button Be Used at Home? By integrating with an alarm system, effective use will be ensured by ensuring that alarm information is sent to the call center or household in the form of messages, etc. in case of a possible alarm. FOR OUR OTHER ELECTRONIC ACCESSIBILITY SOLUTIONS Disabled Toilet Corded Emergency Panic Button and Call Appliance Application Examples

VESDA OSID New generation Beam Detector Osid Beam Detector Product Options Headunits Xtralis OSI-10 Imager 7° Horizontal, 4° Vertical Shield, min. 30m, max 150m range, use only with standard power emitter, 8mA@1xemitter, 10mA@7xemitter ​ Xtralis OSI-90 Imager 80° Horizontal, 48° Vertical Protection, min. 6m, max 34m range (with standard powerful emitter), min. 12m, max 68m range (with high power emitter) ​ Reflectives Xtralis OSE-SP-01 Standard Power Emitter with Internal Battery Xtralis OSE-SPW Standard Power Emitter, 24V DC External Powered Xtralis OSE-HPW High Power Emitter, External Power Input, 800mA@24V DC Xtralis OSE-HP-01 High Power Emitter with Internal Battery

Cigarette, Tobacco Smoke Detector ​It is a portable and active fire detection and warning detector with battery that monitors and immediately warns of possibilities such as smoke, temperature increase or sudden heat that will occur during the first occurrence of fire. Combined detectors are preferred because they can detect multiple risks at the same time. We offer effective detection with cigarette smoke detector solutions to integrate with building automation, alarm, etc. systems. We offer solutions and alarm detector solutions that detect the smoke of all products that contain tobacco, which are prohibited and harmful to health and pose a risk to use in businesses. The answer to the frequently asked question, "Does the smoke detector make a cigarette?" Although the smoke detector is sensitive to the smoke that creates the fire due to its sensor structure, it will not be able to detect without the formation of the so-called under-smoke environment for tobacco smoke detection. The solution for fast and early cigarette smoke detection is "Anti Tobacco" tobacco smoke detection and alarm detectors. You can minimize your risks with our cigarette smoke detection solutions that help control workforce losses, health and fire risks caused by non-compliance with tobacco use ban in businesses. "Cigarette smoke detection detectors: They are especially sensitive to tobacco and cigarette smoke. Selectable sensitivity level on some models. They are manufactured to meet the needs of different institutions and organizations. Prevention of smoking in prohibited areas beyond your control and detection of cigarette smoke in all areas from theaters to movie theaters, hotels to fairgrounds, from factories to industrial facilities, from textile workshops to chemical areas. It is used to minimize, deter and detect the risks that may occur as a result of uncontrolled smoking, thanks to the audible stimulation of cigarette smoke after detection. Product General Features Easy installation and maintenance Photoelectric detection technology Test function • High sensitivity to tobacco smoke Warning sounds • Can be linked together Optional remote indicator or relay output Guaranteed and high quality products and stable operation Usage areas • Factories • Flammable Flammable material facilities Hotel, hostel and student dormitories WC and changing cabins Textile industry manufacturing and storage areas Advantages • Early and effective cigarette tobacco smoke detection Integration with existing brand-independent alarm systems • Wired and wireless detector options With the two different solutions offered, it can monitor all risks with a central system. You can deter them with wireless solutions. 1. Central system solutions 2. Wireless (Battery powered) solutions Our products are designed to detect tobacco smoke in accordance with its particle structure. It is only possible to detect the smoke that occurs during the use of cigarettes, etc. with cigarette - tobacco detectors manufactured for these purposes. With all other fire and smoke detectors, very dense smoke is required to detect cigarette smoke. You can reach PLATIN TECHNOLOGY experts for special solutions for your business. 7 Different Working Modes You can reach all our cigarette smoke detection and alarm solutions here. You can minimize your risks with our cigarette smoke detection solutions that control the workforce losses, health and fire risks caused by non-compliance with the tobacco use ban in businesses. "Cigarette smoke detection detectors: Especially sensitive to tobacco and cigarette smoke. ​ ​ Selectable sensitivity level on some models. They are manufactured to meet the needs of different institutions and organizations. From theaters to movie theaters, from hotels to fairgrounds, from factories to industrial facilities, from textile workshops to chemical areas, preventing smoking and detecting cigarette smoke in prohibited areas beyond your control by your staff and visitors. It is used to minimize, deter and detect the risks that will occur as a result of uncontrolled smoking, thanks to the audible warning after the detection of cigarette smoke. ​ ​ Cigarette Smoke Detector Features • Easy installation and maintenance • Photoelectric sensing technology • Test function • High Tobacco smoke sensitivity • Warning sounds • Interconnectable • Optional remote indicator or relay output • Guaranteed and high quality products and stable operation ​ ​ Cigarette Smoke Detector Usage Areas • Factories • Flammable Flammable Substance Facilities • Hotels, Pensions and student dormitories • WC and changing cabins • Textile industry manufacturing and storage areas Cigarette & Tobacco Smoke Detector Advantages • Early and effective cigarette tobacco smoke detection • Integration with existing brand-independent alarm systems • Wired and wireless detector options ​ ​ With three different solutions offered, it can monitor all risks with a central system. You can make quick and easy installation with wireless solutions. ​ ​ 1. Conventional cigarette smoke detector with control panel 2. Battery powered cigarette smoke detector 3. Relay type cigarette smoke detector ​ ​ Our products are designed to detect tobacco smoke in accordance with its particle structure . It is only possible to detect the smoke that arises from the use of cigarettes, etc., with cigarette-tobacco detectors manufactured for these purposes. With all other fire and smoke detectors, very dense smoke is required to detect cigarette smoke. You can reach PLATIN TECHNOLOGY experts for special solutions for your business.

Calectro Flood and Moisture Detection Systems Fire smoke detection in ventilation ducts The purpose of smoke detection in Calectro ventilation ducts is to detect fire smoke in ventilation systems at an early stage and to send an alarm to the control unit when detected. They can then quickly implement countermeasures such as closing dampers and starting ventilation to limit the spread of smoke. ​ How does smoke detection work in channels? The system consists of a smoke detector and control unit integrated into an air sampling pipe . The air reaches the smoke detector through the duct., smoke detector controls the potential particle fire particles in the air and sends a signal to the control unit installed outside the duct, this signal then closes the dampers, stops the fans via relays / siren will be active and alarm transmit the information otomasyon _cc781905-5cfcf58d_1394- Advanced venturi tube technology Uniguard's patented venturi tube is equipped with aerodynamic flanges, the most efficient way to draw air from the depths of the entire ventilation duct and deliver it to the smoke detector. This facilitates the detection of flue gases even at small doses and low air velocities. The effect of the venturi tube has been measured and documented by external laboratories. Flow-optimized enclosure Uniguard's patented enclosure series (UG-3/4/5) has been specially designed using simulation software to achieve maximum flue gas concentration around the smoke detector. In combination with the venturi tube, the enclosures create unmatched sensing performance even at low air volumes. It also has an indicator for easy inspection of the airflow. Automatic sensitivity adjustment Uniguard's smoke detectors have a built-in, automatic sensitivity adjustment that measures the baseline value in airflow each day and compensates for possible changes in the system over time. This minimizes the risk of unwanted alarms and unnecessary maintenance. Led Status Indicator The Uniguard UG-3 version has both an alarm indicator on the smoke detector and LEDs on the back to make it easy to check the alarm status in confined spaces. Calectro Kanal Tipi Duman Algılama Dedektörleri UG-3-A4O Optical channel smoke detector with automatic sensitivity adjustment, Fault contact and internal control unit, 24V. UG-5-AFR-24V Optical channel smoke detector with automatic sensitivity adjustment, Fault contact and internal control unit, 24V EVC-PY-DA Optical smoke detector with automatic sensitivity adjustment and service alarm. For connection to a control unit. This detector is our primary recommendation! UG-5-AFR-230V Optical duct smoke detector with automatic sensitivity adjustment, Fault contact and internal control unit, 230V UG-7-A6O Optical smoke detector for duct installation for the US Market. High efficiency single sampling tube. Uniguard Superflow single pipe air sampling system for UG-7 OEM. To be used with different types of smoke detectors. UG-3-O Optical channel smoke detector with automatic sensitivity adjustment and service alarm. For connection to the ABAV-S3 control unit. ABAV-S3 24V 24V For smoke detectors with or without fault contact. EVC-PY-DA-MB Optical smoke detector with Modbus communication in the base, 24V. Automatic sensitivity adjustment and Fault contact

FIRE DETECTION SOLUTIONS WITH THERMAL CAMERA HAVE APPROVED BY VDS. Seeing: Our eyes see the light reflected on objects. Cameras and the human eye work on the same basic principle. "Visible light energy hits something and bounces. Natural or artificial sensor takes it and transforms it into an image" "Unless the eye or camera receives sufficient light, the image cannot be taken". In addition to the environmental artificial light sources at night, it is limited to the lights provided by the star and the moon. If these lights are not enough to see, there is no solution other than illuminating the Environment. It's a low light camera. It sends the necessary light to the environment within its task area. acquires an image through reflected light. If there is no light, there is no image! How does the Thermal Camera See? Thermal cameras are completely different from cameras except for the name. Actually we call them "cameras" but these are actually sensors. To understand how they work, the first thing you need to do is forget everything you thought you knew how cameras paint. Thermal cameras paint from heat, not visible light. Heat (also known as infrared or thermal, energy) and light are both parts of the electromagnetic spectrum. A camera that can detect visible light does not see thermal energy. Cameras that can see thermal light cannot take conventional images. Thermal imagers detect more than heat; As little as 0.01 ° C - they detect small differences in temperature and display them in gray or different shades of color. What is Heat Signature? Everything we encounter in our daily life has thermal energy. Even the ice. Something warmer emits more thermal energy. This radiated thermal energy is called the "heat signature". When two objects next to each other have different heat signatures, they are clearly visible in a thermal imager regardless of the lighting conditions. Thermal energy; It reaches you from the area you are viewing. Humans, animals, motors and machines create their own heat, biologically or mechanically. All other objects found in nature Soil, boulder, buoys, vegetation - absorb heat from the sun during the day and radiate it during the night. Since different materials absorb and emit thermal energy at different rates, an area we think of as a temperature is actually a mosaic of different temperatures. Therefore, a log in water for days will look like a different temperature than water and can therefore be seen by a thermal imager. thermal imagers detect these temperature differences and convert them into image detail. Although the images made up of colors seem complicated, the use of the new generation thermal cameras is extremely easy. The images are clear, understandable and easy. It does not require training or interpretation that will take days. If you can watch TV, you can use a thermal camera. As of 2019, VDS has deemed suitable for the use of thermal cameras for early fire detection solutions in difficult and risky areas. dusty, dirty, open or closed areas where it has difficulties ■ Waste incineration facilities ■ Recycling facilities ■ Outdoor storage centers ■ Fuel tanks ■ Container storages ■ Wood processing plants ■ Coal storages provide effective fire detection solutions. : Panoramic heat map of risk areas is created. Operational temperatures are determined separately for each point on this map. The heat map is updated instantly and the detection scenario starts to be applied in case the temperature changes exceed the determined limits. In this way, fire is detected before it occurs. Operating Logic: The early fire detection software evaluates every temperature change in the detection area and can automatically initiate appropriate measures. The system can independently detect if it detects a source of interference (eg hot exhaust vehicle, truck with heated brake linings) or whether the fire has started. If a fire is clearly detected, the warning can be transmitted directly to a central fire alarm system and a mechanical extinguishing system. With special software, it can also automatically control a fire extinguisher (fire extinguisher monitor) to combat the fire directly and prevent major damage until the fire brigade arrives. Installed fixed water, foam fire extinguishing equipment can be activated and triggered Advantages of early fire detection system with thermal camera: Panoramic thermal imaging For the first time, flawless, radiometric close-ups have been made possible with this technology. ■ High measurement precision Thermal images with a resolution of 16,500 x 9,600 measurement points ■ Detailed view in detail A zoom-capable video camera is integrated. In this way, in a single user interface, both normal camera view and thermal camera view can be made at the same time (360 °). ■ Very easy-to-use feature Touch screen functions and indicators are designed as simple as possible and the user is aimed to concentrate on security-related tasks. is difficult with, or there is a high probability of false alarms. Usages in all risky mums and dusty environments can be carried out without any problems thanks to the integrated heating and cooling system and the blowing system in the optics. Panoramic thermal imager can be integrated into systems that extinguish fires fully automatically ■ Almost maintenance-free Precise and high-quality movement capability for continuous use and special cables remaining inside ■ Integrated fire alarm outputs compatible with all centrally known fire alarm systems ■ Central control Only one controller Full targeted control of one or more extinguishing monitors for fully automatic extinguishing with extinguishing control Can be expanded modularly Additional cameras and workstations can be added to this system at any time. knowledge is not required. The four fixing bolts must be removed, the power supply and mains cable disconnected, that's all it takes. The system starts automatically after the change and automatically takes over all the settings. Panoramic heat map of risk areas is created. Operational temperatures are determined separately for each point on this map. The heat map is updated instantly and the detection scenario starts to be applied in case the temperature changes exceed the determined limits. In this way, fire is detected before it occurs.

ANSWERS Platin Teknoloji offers solutions across Turkey with the world's leading brands for sectoral risks and security problems specific to projects. Maritime and Marine Services Historical Artifact Restoration Solutions Industrial Facilities Hospitals and Healthcare institutions Business Centers and Plazas Defense industry Banking and finance Automotive Schools and Educational Institutions Solar power plants Merchandising and Retail Mining

Supra Key Storage Boxes With the Supra car key storage box, the solution to key loss problems in workshops and showrooms. History of the Key Box ​ ​ The first lock box was invented more than 65 years ago by Supra founder Delbert Williams. Delbert, a real estate professional, was tired of chasing keys to show clients homes. He made a key box from a Yale® bike lock and sand cast aluminum container. Although very primitive, this lockbox served its purpose well—it eliminated the need for agents to search for listing keys to get into homes for sale. With this instant one-touch access, the first Supra keybox was born. As our society has changed since 1955, when Delbert founded Supra, the industry has demanded more secure key boxes that also provide accountability. In 1990 the first electronic keybox – Supra Advantage Express – was introduced with overwhelming success. With the release of the iBox in 2002, real estate agents were able to "beam" an infrared signal into the boxes. Bluetooth® wireless technology was added to the line in 2010 with the Bluetooth iBox, so that Bluetooth smartphones can communicate directly with the iBox BT without the need for additional hardware. Supra switches and management systems As lock boxes have evolved, so have the keys that open them. The original mechanical keys were quickly abandoned as they could be found and used by unauthorized persons if lost. In 1990 the battery-powered EntryCard communicated via voice tones over a telephone line, sending data to LENI, Supra's first data management system, for authorization. As EntryCard evolved into SupraCard and SupraKEY, LENI gave way to KIM and now SupraNET, the Internet-based portal for data management. In 2000, the password for eKEY for Palm® was “Use your mobile phone as your key”. eKEY continues to evolve with the telecommunications industry, now available as a smartphone app for BlackBerry®, iPhone® and Android™ platforms. Hardware versions of electronic keys include DisplayKEY and ActiveKEY. ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ Supra indigo ® KeyBox key storage boxes: For the safe storage of keys that cause problems in all businesses operating in the automotive sector such as logistics, maintenance, repair, second hand, service, sales, access them quickly when necessary, and to prevent workforce losses as a result of instant key losses offers a solution. Key storage boxes are made of special aviation aluminum alloy and are durable. In this way, it can be kept in the box on the vehicle in all seasons and regardless of day and night. Fast secure key management can be provided with the company-specific encrypted key system created specifically for the business. In vehicles with a new generation keyless start feature, it is necessary to disable the feature in such vehicles or use the new generation models produced for such keys, since the key must be kept at a certain distance in order to lock it. The solution for such vehicle keys is the max series. A special area inside the storage box ensures that the key is magnetically protected. It prevents the doors from opening even in the storage box hung on the vehicle's window. Automotive type key storage boxes are Ultra light and have convenient storage capacity for automobile keys.